Electronic Product Design • Embedded Systems Design• IoT Hardware Design • Prototyping • Open Source Hardware design• Open Source Firmware Development • PCB Fabrication • PCB Assembly • PCB Box Building • Plastic Enclosure Design • Sheet Metal Enclosure design • Electronic Manufacturing services company• EMS Company

Custom Embedded Hardware/Software Design

RIOSH has designed several customized Electronic Products till date for various customers & several use cases. RIOSH showcases just a few of its own products below as an example of its capabilities. OEM customizations to the below products are possible based on the customer’s specific requirements. Solutions for thousands of ODM/OEM customers through custom hardware/software designs in single board computers, computer-on-modules, touch panel PCs, Arduino board customization, and peripherals. In case clients need POC help, RioSH can arrange to demonstrate with the development kit. Reduce risk and time to market. A dedicated, expert-embedded team at your fingertips. our engineers are highly experienced in assisting customers with both embedded hardware and software designs and solutions, Reducing the risk associated with the embedded project and decreasing your time to market. 

Development Kits Available with RioSH

LTE Cat 4 SC20 Module

Key Features

● Two (U)SIM interfaces
● Two UART interfaces
● Multiple audio interface
● USB interface
● Keypads and LED indication lights

EVB Kit Includes
● USB to UART converter cable X 1
● USB cable X 1
● RF cable X 3
● Main antenna X 2
● WiFi antenna X 1
● GNSS antenna (passive) X 1
● Earphone X 1
● USB 2.0 to RS232 driver and USB driver disk X 1
● Li-polymer battery X 1
● Bolts and nuts for fixing EVB X 1

NRF52-DK

Key Features

● nRF52 Series SoC family
● Two UART interfaces
● nRF52832
● Bluetooth 5, Bluetooth mesh, ANT and 2.4 GHz proprietary stacks.
● Keypads and LED indication lights 

EVB Kit Includes

● USB cable X 1
● NFC Antenna
● Bluetooth Antenna
● Li-polymer battery X 1
● Bolts and nuts for fixing EVB X 1

STM32F7508-DK Discovery Kit

Key Features

● STMicroelectronics  STM32F750N8H6
● 128-Mbit Quad-SPI Flash memory, 128-Mbit SDRAM (64 Mbits accessible)
● 4.3-inch 480×272 color LCD-TFT with capacitive touch screen 
● USB with Micro-AB
● Keypads and LED indication lights

● Camera 8 Bit
● Two UART interfaces
● Multiple audio interface
● Ethernet RJ45
● SPDIF RCA input

EVB Kit Includes
● USB cable X 1
● TFT Display

 

Silicon Labs EFR32xG21

Key Features

  • BRD4180A Radio Board
    • EFR32xG21 Wireless Gecko Wireless SoC with 1024kB Flash and 96kB RAM (EFR32MG21A020F1024IM32)
    • Inverted-F PCB antenna (2.4GHz band)
    • 2x user color LEDs (red and green)
  • Wireless STK Mainboard
    • Advanced Energy Monitor
    • Packet Trace Interface
    • Virtual COM port
    • SEGGER J-Link on-board debugger
    • External device debugging
    • Ethernet and USB connectivity
    • Low power 128×128 pixel Memory LCDTFT
    • User LEDs/pushbuttons
    • 20-pin 2.54mm EXP header
    • Breakout pads for Wireless SoC I/O
    • CR2032 coin cell battery support
  • Software
    • Simplicity Studio™
    • Energy Profiler
    • Network Analyzer

EVB Kit Includes

  • 3x BRD4001A Wireless Starter Kit Mainboard
  • 3x BRD4180A EFR32xG21 2.4GHz 20dBm Radio Board
  • 3x BRD4181A EFR32xG21 2.4GHz 10dBm Radio Board
  • 3x AA battery holders
  • 3x USB Type A to Mini-B cables
  • 1x BRD8010A Debug Adapter Board

P-NUCLEO-WB55

Key Features

  • Nucleo68
    • STM32WB microcontroller in a VFQFPN68 package
    • 2.4 GHz RF transceiver supporting Bluetooth® specification v5.0 and IEEE 802.15.4-2011 PHY and MAC
    • Three user LEDs
    • Three user buttons and one reset button
    • Board expansion connectors:
      • Arduino™ Uno V3
      • ST morpho
    • Integrated PCB antenna or footprint for SMA connector
    • On-board socket for CR2032 battery
    • On-board ST-LINK/V2-1 debugger/programmer with USB re- enumeration capability: mass storage, virtual COM port and debug port
    • Support of a wide choice of Integrated Development Environments (IDEs), including IAR™, Keil®, GCC-based IDEs, Arm® Mbed™
  • USB dongle
    • STM32WB microcontroller in UFQFPN48 package
    • Switch for boot management
    • User push button
    • Three user LEDs
    • Integrated PCB antenna or UFL connector

EVB Kit Includes

● USB cable X 1
● Li-polymer battery X 1

EZ-USB® FX3™ USB Controller

Key Features

  • SuperSpeed It™ with FX3
    • Add USB 3.1 Gen1 (5.0 Gbps) capability to any system
    • Up to 32-bit, 100 MHz, parallel General Programmable Interface (GPIF II)
  • Additional connectivity to peripherals
    • Easy connectivity to peripherals such as I²C, I²S, UART, SPI, and GPIOs
  • USB 2.0 OTG compliant
    • Hi-Speed On-the-Go (HS-OTG) host and peripheral compliant with On-the-Go supplement version 2.0
  • Improved battery charging capabilities
    • Compliant with USB BC v1.1
  • Easy code development and integration
    • EZ-USB tools: complete solution with silicon, SDK, APIs, GPIF II Designer GUI, and DVK
  • Enable powerful data processing and customization
    • Fully accessible 32-bit, 200 MHz, ARM9™ core with up to 512 KB of embedded SRAM​

EVB Kit Includes
● USB 3.0 cable X 1

Allwinner A13

Key Features

  • A13 Cortex A8 processor at 1GHz, 3D Mali400 GPU
  • 512 MB RAM (2 x 256Mbit x 8)
  • 4/8GB NAND Flash (for A13-OLinuXino-WIFI)
  • 3 + 1 USB hosts, 3 available for users, 1 leads to onboard pinout or to WIFI module (for A13-OLinuXino-WIFI)
  • 1 USB OTG which can power the board
  • SD-card connector for booting optional Linux images
  • VGA video output
  • LCD signals available on connector so you still can use LCD if you disable VGA/HDMI
  • Audio output
  • RTC PCF8563 on board for real time clock and alarms
  • GPIO connector with 68/74 pins and these signals:
    • 17 for adding NAND flash;
    • 22 for connecting LCDs;
    • 20+4 including 8 GPIOs which can be input, output, interrupt sources;
    • 3x I2C;
    • 2x UARTs;
    • SDIO2 for connecting SDcards and modules;
    • 5 system pins: +5V, +3.3V, GND, RESET, NMI

EVB Kit Includes

  • 1x USB OTG Cable

Z-turn Board - Xilinx Zynq-7010 / 7020 SOC

Key Features

  • Xilinx XC7Z010-1CLG400C (Zynq-7010) or XC7Z020-1CLG400C (Zynq-7020)
  • 667MHz ARM® dual-core Cortex™-A9 MPCore processor (up to 866MHz)
  • Integrated Artix-7 class FPGA subsystem
    with 28K logic cells, 17,600 LUTs, 80 DSP slices (for XC7Z010)
    with 85K logic cells, 53,200 LUTs, 220 DSP slices (for XC7Z020)
  • NEON™ & Single / Double Precision Floating Point for each processor
    – Supports a Variety of Static and Dynamic Memory Interfaces
  • 1GB DDR3 SDRAM (2 x 512MB, 32-bit)
  • 16MB QSPI Flash, TF card interface

  • 1 x 10/100/1000M Ethernet

  • 1 x CAN

  • 1 x Mini USB2.0 OTG

  • 1 x USB-UART debug interface

  • 1 x HDMI (supports 1080p resolution)
  • USB power supply or DC 5V/2A

EVB Kit Includes

● USB cable X 1
● Power Adapter

Microchip USB3.0 DT-USB5734

Key Features

  • USB 3.0 compliant (SS, HS, FS, and LS operation)
  • Two downstream USB-C ports, and two USB3-A ports
  • Four downstream ports enabled for battery charging
  • Two USB3-C ports – 3A maximum per port
  • Two USB3-A ports – 1.5A maximum per port
  • Microchip MIC24055 based switching regulator circuit can provide up to 10A at 5V when using a
    12V 60 watt minimum power supply.
  • Up to 9A total battery charging current when using a 12V, 60 watts minimum power supply
  • Operates from a single 12VDC external power supply
  • USB to Serial bridge with on board RS-232 transceiver and DB9 connector
  • TTL level serial signals available on headers for probing
  • Port Power LED indicators
  • Power LED indicators for on board 5V and 3.3V DC regulators.
  • Cable orientation LED indicators for USB-C ports
  • Reset pushbutton with LED indicator

EVB Kit Includes

● Kit Manual

STM32F0308-DISCO

Key Features

  • STM32F051R8T6 microcontroller featuring 64 KB Flash, 8 KB RAM in an LQFP64 package
  • On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging)
  • Board power supply: through USB bus or from an external 5 V supply voltage
  • External application power supply: 3 V and 5 V
  • Four LEDs:
    • LD1 (red) for 3.3 V power on
    • LD2 (red/green) for USB communication
    • LD3 (green) for PC9 output
    • LD4 (blue) for PC8 output
  • Two push buttons (user and reset)
  • Extension header for all LQFP64 I/Os for quick connection to prototyping board and easy probing
  • An additional board is provided which can be connected to the extension connector for even easier prototyping and probing.

EVB Kit Includes

  • 1x Micro USB Cable

LI-USB30-AR0144X

Key Features

  • USB 3.0 Super Speed support
  • 12-bit RAW data output without compression
  • UVC compliance
  • Monochrome or Color sensor
  • Global shutter
  • Support register access function
  • Provide customization services
  • USB +5VDC powered device
  • Compact Size: 26mmx26mm
  • 2 Boards are stacked
  • Focusing Range: 20cm to Infinity
  • Focal length: 2.3 mm
  • F/#: 2.2
  • FOV (H): 85°
  • TV Distortion < -20%

EVB Kit Includes

● USB3.0 cable X 1

● MIPI camera.

TAIYO YUDEN NRF52832 Development kit

Key Features

  • Supports Bluetooth v5.0 low energy technology specification
  • Features nRF52832 WLCSP (Nordic)
    • ARM® Cortex®-M4F 32-bit processor
    • 512 kB Flash and 64 kB RAM
    • Supports SPI, UART, I²C, I²S, PDM, and 12-bit ADC
  • 2,402 MHz to 2,480 MHz ISM band, +4 dBm (typical) output power
  • 1.7 V to 3.6 V single power supply
  • Integrated 32 MHz system clock
  • Integrated high performance PCB antenna
  • Supports NFC-A Type-2 for touch-to-pair applications
  • Available for ANT™ protocols
    • Need to obtain ANT compatible SoftDevice from ANT Alliance
  • -40°C to +85°C operating temperature range
  • Very small outline with shielded molding package technology
    • 3.25 mm x 8.55 mm x 0.9 mm MAX
  • Certified Japan, FCC, and IC regulation
  • CE-conducted test report available

EVB Kit Includes

● Kit Manual

Electronic Product Design • Embedded Systems Design• IoT Hardware Design • Prototyping • Open Source Hardware design• Open Source Firmware Development • PCB Fabrication • PCB Assembly • PCB Box Building • Plastic Enclosure Design • Sheet Metal Enclosure design • Electronic Manufacturing services company• EMS Company